Causes and Treatment Methods of EDM Molybdenum Wire Breakage

EDM Molybdenum wire plays a vital role in the high speed and medium speed cutting processing. High-strength, low-elongation molybdenum wire is the guarantee of high efficiency and high stability processing. However, it is inevitable to encounter the problems of broken wire, burnt wire, and speckled wire in the actual processing process, we have summarized the following common phenomena and corresponding solutions.

Research on the machining of deep and small holes by small hole EDM drill machine with the ratio of depth to diameter greater than 1:100

The processing of deep and small holes with super large depth-to-diameter ratio has always been a difficult problem in the manufacturing industry. For small hole EDM drill machine, it is more difficult to process deep and small holes with a depth-to-diameter ratio of more than 100:1, especially those with a diameter of less than 1.0 mm. EDM deep and small hole machining is one of the more mature machining methods. Through a series of experiments (tests on brass/copper electrode tube), this paper expounds the feasibility of electric machining deep holes, making it possible to electric machining deep small holes and guaranteeing certain technical conditions.

The Analysis and Solution of speckled wire Phenomenon of EDM Molybdenum Wire

After a period of processing, the molybdenum wire EDM wire will appear dark and light-colored spots, sometimes arranged according to a certain pattern to form a pattern, so it is called speckled wire.

Selection and Suggestion of Filter Paper for EDM Filters

EDM machine tools are mainly used for the manufacture of various molds, electrodes, and precision parts, as well as the processing of complex cavities and curved surfaces of various conductive materials. It has the characteristics of high machining accuracy, high finish and fast cutting speed. Especially in medium-speed wire cutting machine tools and low-speed wire EDM machine tools, the filter plays a vital role in ensuring processing accuracy and stability. Now combined with TAGUTI EDM FILTER

View More

Home / View More

Tags

Agie Charmilles
Fanuc
Makino
Mitsubishi
Sodick
TAGUTI EDM
TAGUTI EDM Parts
Brass Tube
brass wire and lon exchange resin
Copper Tube
Cutters, Cable
Filters
Fixed block
HS-EDM PARTS
Power feed contact
Roller gear, shaft, belt
Rubber seal
Thread Electrode
View More
Water nozzle
Wire Cut EDM Heightened Screws
Wire Cut EDM plain vice
Wire EDM Clamp
Wire EDM Extensions Clamp
Wire guide
Wire guides

Items 1 to 24 of 43 total

Select View:

Sort By:

Featured
Price, low to high
Price, high to low
Alphabetically, A-Z
Alphabetically, Z-A
Date, old to new
Date, new to old
Best Selling

EDM Drilling Collet for Agie Charmilles & Sodick | TAGUTI

$4.95

EDM Drilling Collet for Agie Charmilles & Sodick | TAGUTI

◆ Commodity: Collet ◆ Application: EDM drilling ◆ Packing quantity: 1 pc(s) ◆ Machine type: Charmilles SH2, SH2 CNC, Sodick K1CN, K1CS, K2CN, K2PN, K3BL, K3CN, K3HN,K3 ◆ Category: Tube guides

$4.95

200447082 447.082 Agie Charmilles EDM Carbon Brushes| TAGUTI

$12.80

200447082 447.082 Agie Charmilles EDM Carbon Brushes| TAGUTI

◆ Commodity: Carbon brushes 4*7*15mm ◆ TAGUTI number: C7082 ◆ OEM numbers: 200447082 447.082 ◆ Packing quantity: 1 set of 2 pcs ◆ Machine type: Agie Charmilles CUT 20, CUT 20 P, CUT 200, CUT 200 mS, CUT 200 Sp, CUT 30, CUT 30 P, CUT 300, CUT 300 mS,...

$12.80

135016089 Agie Charmilles Wire EDM Contact Holder C6089 | TAGUTI

$27.00

135016089 Agie Charmilles Wire EDM Contact Holder C6089 | TAGUTI

◆ Commodity: Contact holder 29.6*17.5*16.9mm ◆ TAGUTI number: C6089 ◆ OEM numbers: 135016089 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Agie Charmilles CUT 20, CUT 20 P, CUT 200, CUT 200 mS, CUT 200 Sp, CUT 30, CUT 30 P, CUT 300, CUT 300 mS, CUT 300 Sp, CUT...

$27.00

135008364 C8364 Agie Charmilles Wire EDM Contact Holder | TAGUTI

$27.00

135008364 C8364 Agie Charmilles Wire EDM Contact Holder | TAGUTI

◆ Commodity: Contact holder ◆ TAGUTI number: C8364 ◆ OEM numbers: 135008364 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Agie Charmilles CUT 20, CUT 20 P, CUT 30, CUT 30 P, FI 1000, FI 1020, FI 1020.1, FI 1020SI, FI 190, FI 2000, FI 2020, FI 2020.1, FI 2020SI,...

$27.00

104325510 Agie Charmilles Wire EDM Machining U-Slot Contact

$72.50

104325510 Agie Charmilles Wire EDM Machining U-Slot Contact

◆ Commodity: U-slot contact ◆ TAGUTI number: C5510 ◆ OEM numbers: 104325510 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Agie Charmilles CUT 200, CUT 200 mS, CUT 200 Sp, CUT 300, CUT 300 mS, CUT 300 Sp, CUT P 1250, CUT P 350, CUT P 550, CUT P 800,...

$72.50

X059D050H03 Mitsubishi Wire Cutting Machine Felt Pad

$9.95

X059D050H03 Mitsubishi Wire Cutting Machine Felt Pad

◆ Commodity: Felt pad Φ70*Φ10x7mm ◆ OEM numbers: X059D050H03, DN25200, 135441 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Mitsubishi FA10, FA10-P, FA10-S, FA10-V, FA10-VS, FA20, FA20-P, FA20-S, FA20-V, FA20-VS, FA30-M, FA30-P, FA30-S, FA30-V, FA40, FA40-V, FA50-V ◆ Application: Wire-cut EDM ◆ Category: Seals

$9.95

Z241A0017000 Makino SP64 Wire Cutting Machine Bearing | TAGUTI

$11.50

Z241A0017000 Makino SP64 Wire Cutting Machine Bearing | TAGUTI

◆ Commodity: Bearing Φ19*Φ6mm ◆ OEM numbers: Z241A0017000 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Makino SP43, SP64,U32,U32i, U32j, U53, U53i, U53j,U53K,U53Tj ◆ Application: Wire-cut EDM ◆ Category: Bearings

$11.50

A290-8102-X684 Fanuc Wire EDM Machining Spring | TAGUTI

$27.00

A290-8102-X684 Fanuc Wire EDM Machining Spring | TAGUTI

◆ Commodity: Spring 23.8*38*0.1mm ◆ TAGUTI number: F402 ◆ OEM numbers: A290-8102-X684 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Fanuc α-0A with AWF, α-0B with AWF, α-0C with AWF, α-0iA with AWF, α-0iB with AWF, α-0iC with AWF, α-0iD with AWF, α-0iE with AWF, α-1A with AWF, α-1B with AWF,...

$27.00

S859N319P31 M458 Mitsubishi Wire EDM Machining Ball Bearing

$11.50

S859N319P31 M458 Mitsubishi Wire EDM Machining Ball Bearing

◆ Commodity: Ball bearing ID=8.0mm ◆ TAGUTI number: M458 ◆ OEM numbers: S859N319P31, 12941, M744, DA19700, DA197A ◆ Packing quantity: 1 pc(s) ◆ Machine type: Mitsubishi CX10, CX20, DWCXXX-H1 AWF, DWCXXX-HA AWF, DWCXXX-SA, DWCXXX-SB, DWCXXX-SZ,PX05, SX10, SX20 ◆ Application: Wire-cut EDM ◆ Category: Bearings

$11.50

S859N319P10 S859N319P33 Mitsubishi Wire EDM Ball Bearing

$11.50

S859N319P10 S859N319P33 Mitsubishi Wire EDM Ball Bearing

◆ Commodity: Ball bearing ID=7.0mm◆ TAGUTI number: M457◆ OEM numbers: S859N319P10,S859N319P33,M680,16130,DA18900,DA189A◆ Packing quantity: 1 pc(s)◆ Machine type: Mitsubishi CX10, CX20, DWCXXX-H1 AWF, DWCXXX-HA AWF, DWCXXX-SA, DWCXXX-SB, DWCXXX-SZ, PX05, SX10, SX20◆ Application: Wire-cut EDM◆ Category: Bearings

$11.50

X059D050H02 Mitsubishi Wire Cutting Machine Felt Pad

$9.95

X059D050H02 Mitsubishi Wire Cutting Machine Felt Pad

◆ Commodity: Felt pad Φ59*Φ9*5mm ◆ OEM numbers: X059D050H02 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Mitsubishi FA10-V, Mitsubishi FA10-VS, Mitsubishi FA20-V, Mitsubishi FA20-VS, Mitsubishi FA30-V ◆ Application: Wire-cut EDM ◆ Category: Miscellaneous

$9.95

X174D199H02 Mitsubishi Wire Cutting Machine Felt Pad | TAGUTI

$9.95

X174D199H02 Mitsubishi Wire Cutting Machine Felt Pad | TAGUTI

◆ Commodity: Felt pad Φ50*Φ10*10mm ◆ TAGUTI number: M912 ◆ OEM numbers: X174D199H02, M144 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Mitsubishi DWCXXX-F STD, DWCXXX-F1 STD, DWCXXX-H1 STD, DWCXXX-HA STD, DWCXXX-SZ, FX10, FX10-K, FX20, FX20-K, FX30, FX30-K, QA10, QA20 ◆ Application: Wire-cut EDM ◆ Category: Miscellaneous

$9.95

X179D323H02 M451 Mitsubishi EDM Machining Cap Screw | TAGUTI

$7.00

X179D323H02 M451 Mitsubishi EDM Machining Cap Screw | TAGUTI

◆ Commodity: Cap screw ◆ TAGUTI number: M451 ◆ OEM numbers: X179D323H02, M114 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Mitsubishi DWCXXX-F STD, Mitsubishi DWCXXX-F1 STD, Mitsubishi DWCXXX-HA STD ◆ Application: Wire-cut EDM ◆ Category: Fasteners

$7.00

A290-8112-X391 Fanuc Wire EDM Machining Protection Guard

$182.00

A290-8112-X391 Fanuc Wire EDM Machining Protection Guard

◆ Commodity: Protection guard ◆ OEM numbers: A290-8112-X391 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Fanuc α-0iA with AWF, α-0iA without AWF, α-0iB with AWF, α-0iB without AWF, α-0iC with AWF, α-0iC without AWF, α-1iA with AWF, α-1iA without AWF, α-1iB with AWF, α-1iB without AWF, α-1iC with AWF,...

$182.00

A290-8101-X394 Fanuc Wire EDM Machining Feed Guide | TAGUTI

$13.50

A290-8101-X394 Fanuc Wire EDM Machining Feed Guide | TAGUTI

◆ Commodity: Feed guide 13*20*19mm ◆ TAGUTI number: F5103 ◆ OEM numbers: A290-8101-X394 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Fanuc α-0A with AWF, α-0A without AWF, α-0B with AWF, α-0B without AWF, α-0C with AWF, α-0C without AWF, α-1A with AWF, α-1A without AWF, α-1B with AWF, α-1B...

$13.50

20EC090A401 Makino SP43 Wire Cutting Machine Block | TAGUTI

$29.50

20EC090A401 Makino SP43 Wire Cutting Machine Block | TAGUTI

◆ Commodity: Block ◆ TAGUTI number: N8901 ◆ OEM numbers: 20EC090A401 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Makino SP43, Makino SP64 ◆ Application: Wire-cut EDM ◆ Category: Miscellaneous

$29.50

X053C245H02 M111 Mitsubishi Wire EDM Lower Power Feeder Holder

$23.00

X053C245H02 M111 Mitsubishi Wire EDM Lower Power Feeder Holder

◆ Commodity：Lower power feeder holder ◆ TAGUTI number：M111 ◆ OEM numbers: X053C245H02, M579 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Mitsubishi DWCXXX-H1 AWF, DWCXXX-H1 STD, DWCXXX-HA AWF, DWCXXX-HA STD, DWCXXX-SA, DWCXXX-SB, DWCXXX-SZ ◆ Application: Wire-cut EDM ◆ Category: Miscellaneous

$23.00

6EC220B716=1 Makino Wire Cutting Machine Felt Pad | TAGUTI

$4.95

6EC220B716=1 Makino Wire Cutting Machine Felt Pad | TAGUTI

◆ Commodity: Felt pad OD17*D4*2mm ◆ OEM numbers: 6EC220B716=1 ◆ Packing quantity: 1SET=2PCS ◆ Machine type: Makino DUO43, DUO64, SP43, SP64, U1310, U3, U3 H.E.A.T, U32, U32i, U32j, U32K, U53, U53i, U53j, U53K, U53Tj, U6, U6 H.E.A.T, U86, UP32j, UP53j, UPV-3, UPV-5, W32FB,W53FB ◆ Application: Wire-cut EDM ◆ Category: Felt...

$4.95

6EC100A761 Makino Wire Cutting Machine Felt Pad | TAGUTI

$4.95

6EC100A761 Makino Wire Cutting Machine Felt Pad | TAGUTI

◆ Commodity: Felt pad OD15*ID6*5mm ◆ OEM numbers: 6EC100A761 ◆ Packing quantity: 1SET=2pcs ◆ Machine type: Makino DUO43, DUO64, EC32, EC64, EE3, EE6, EE6L, EE8, EQ5, EQF5, EQH5, U1310, U3, U3 H.E.A.T, U32, U32i, U32j, U32K, U53, U53i, U53j, U53K, U53Tj, U6, U6 H.E.A.T, U86, UP32j, UP53j, UPV-3, UPV-5, W32FB,...

$4.95

1EC100B703 Makino EE8 EQ5 Wire EDM Felt pad

1EC100B703 Makino EE8 EQ5 Wire Cutting Machine Felt Pad | TAGUTI

$9.95

1EC100B703 Makino EE8 EQ5 Wire Cutting Machine Felt Pad | TAGUTI

◆ Commodity: Felt pad OD32*ID9*5mm ◆ OEM numbers: 1EC100B703 ◆ Packing quantity: 1SET=2 pcs ◆ Machine type: Makino DUO43, DUO64, EC32, EC64, EE3, EE6, EE6L, EE8, EQ5, EQF5, EQH5, SP43, SP64, U1310, U3, U3 H.E.A.T, U32, U32i, U32j, U32K, U53, U53i, U53j, U53K, U53Tj, U6, U6 H.E.A.T, U86, UP32j, UP53j,...

$9.95

200542925 542.925 Agie Charmilles Wire EDM Washer Special | TAGUTI

$79.90

200542925 542.925 Agie Charmilles Wire EDM Washer Special | TAGUTI

◆ Commodity: Washer, special ◆ TAGUTI number: C2925 ◆ OEM numbers: 200542925 542.925 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Agie Charmilles CUT 200, CUT 200 mS, CUT 200 Sp, CUT 300, CUT 300 mS, CUT 300 Sp, CUT P 1250, CUT P 350, CUT P 550, CUT P...

$79.90

3110304 0205480 11802HC 0205480JP Sodick Spring Ring FJ Lower

$2.95

3110304 0205480 11802HC 0205480JP Sodick Spring Ring FJ Lower

◆ Commodity: Spring ring FJ Lower OD28*ID22*1.6mm ◆ TAGUTI number: S421 ◆ OEM numbers: 3110304, 0205480, 11802HC, 0205480JP ◆ Packing quantity: 1 pc(s) ◆ Machine type: Sodick AG360L, AG400L, AG600L, AG600LH, ALC400G, ALC600G, ALN400G, ALN600G, AP250L, AP650L, AQ400L, AQ600L, SL400G, SL400Q, SL600G, SL600Q ◆ Application: Wire-cut EDM ◆ Category: Springs

$2.95

3086221 0205140 Sodick Wire Cutting Spring Ring S406 | TAGUTI

$2.95

3086221 0205140 Sodick Wire Cutting Spring Ring S406 | TAGUTI

◆ Commodity: Spring ring OD29.5*ID22.8*1.6mm ◆ TAGUTI number: S406 ◆ OEM numbers: 3086221, 0205140 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Sodick A1000W, A300W, A320D, A325, A350, A350S, A350SSW, A350W, A500, A500W, A530D, A600, A600W, A750, A750, A750, A750, A750, AP150, AP200L , AP300, AP330, AP450, AP450L, AP500L, AP550, AQ325L,...

$2.95

3082526 3082804 Sodick Wire Cutting Nozzle Base S407 | TAGUTI

$45.00

3082526 3082804 Sodick Wire Cutting Nozzle Base S407 | TAGUTI

◆ Commodity: Nozzle base 50*50*13.3mm M16(Tap) ◆ TAGUTI number: S407 ◆ OEM numbers: 3082526 3082804 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Sodick A320D, Sodick AG400L, Sodick AG600L, Sodick AP200L, Sodick AP450L, Sodick AQ325L, Sodick AQ327L, Sodick AQ535L, Sodick AQ537L, Sodick AQ550L, Sodick AQ750L, Sodick EXC100L ◆ Application: Wire-cut...

$45.00

Items 1 to 24 of 43 total